Cablu multicore 8 canale 10m
Cablu multicore 8 canale10m.- Cablu multicore eXpert Music 10m, 8canale, profesional, de o inalta calitate, rezistent.Date tehnice:Nr Canale 10Greutate cu cablu 4 kgCablu lungime FUTURELIGHT EYE-190 Zoom LED Wash
FUTURELIGHT EYE-190 Zoom LED Wash
| PRODUCATORI | : Future Light | |
 |
|
IN ACEASTA PERIOADA, PRETURILE POT AVEA MODIFICARI FRECVENTE
● Inainte de a plasa o comanda, va rugam sa ne contactati telefonic sau prin e-mail pentru verificarea disponibilitatii stocului si al pretului. Va multumim!
● PRETURILE PRODUSELOR POT FI MODIFICATE, CHIAR DACA A FOST PLASATA O COMANDA PENTRU ACELE PRODUSE, CONSUMATORUL URMAND SA FIE INSTIITANT DESPRE ACEASTA MODIFICARE.
FUTURELIGHT EYE-190 Zoom LED Wash
Specificatii:
- Equipped with 19 quadcolor LEDs in the colors RGBW (Osram)
- With integrated wireless receiver for WDMX operation
- Supports RDM (Remote Device Management)
- 20, 32 or 42 DMX channels selectable
- Exact positioning via 16-bit Pan/Tilt movement resolution
- PAN angle switchable between 630° and 540°
- Stepless RGBW color changing
- 19 LEDs in 3 LED groups independently controllable
- Programmable color change speed and strobe effect
- Strobe effect with 1-18 flashes per second
- Random strobe effect
- Motorized zoom with 13°-27° beam angle
- Masterdimmer
- Color presets
- Color macros
- Chase patterns
- Automatic position correction
- DMX-controlled operation or stand-alone operation with Master/Slave function
- Sound-controlled via built-in microphone
- ESDC function (Easy Service Data Check) with battery-buffered Control Board for operation time readouts etc.
- Control board with graphic LCD display and touch keyboard for adjusting the DMX-starting address, PAN/TILT reverse, program, reset, operating hours
- RDMX (Remote DMX Addressing): DMX address setting via controller possible
- 7 built-in programs can be called up via DMX controller
- 56 preprogrammed scenes in Program Run for stand-alone operation
- Number of scenes in Program Run can be changed individually
- The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
- Software upload by optional accessory via DMX link
- Switch-mode power supply
- Automatic power supply adaption between 100 and 240 Volts without power selector
- Power connection via Neutrik PowerCon jack and included power cable
- DMX control via every standard DMX controller
Adresati-ne o intrebare / Scrieti-ne un comentariu (review)
* Campuri obligatorii